*FE22 - Torsion spring test
FE 22 module - Torsion spring test
Take your testing to the next level – available as an add-on module
Description
Determination of up to 10 reference points (torques, spring angles) in load direction left or right. The torsion springs can be loaded statically and dynamically, i.e. they can be stopped at the reference points for an adjustable time or they can be traversed to the reversal point. Setting cycles can be activated before the actual test. Using the built-in formula editor, additional spring characteristic values such as replacement spring rate can be calculated. After determining the deformation curve of the test device using an additional program (DEF)supplied, it is sent to the measuring electronics. Thus the spring angles are already determined during the test with deformation correction or are positioned on deformation corrected spring angles.
Basic Results
- Number M: Number of reference values Spring angle -> Moment
- Number W: Number of reference values Moment -> Spring angle
- Number R: Number of spring rates
- Number RV: Number of spring rate profiles
- M1..M10: Moment at spring angle
- a0..a9: Spring angle at moment
- R1..R10: Spring rate
- RV1..RV10: Spring rate profile
> Download <
FE22 Manual